SAP CPIC Error Codes

CPIC return codes (not SAP-specific)

CM_OK 0
CM_ALLOCATE_FAILURE_NO_RETRY 1
CM_ALLOCATE_FAILURE_RETRY 2
CM_CONVERSATION_TYPE_MISMATCH 3
CM_SECURITY_NOT_VALID 6
CM_SYNC_LVL_NOT_SUPPORTED_PGM 8
CM_TPN_NOT_RECOGNIZED 9
CM_TP_NOT_AVAILABLE_NO_RETRY 10
CM_TP_NOT_AVAILABLE_RETRY 11
CM_DEALLOCATED_ABEND 17
CM_DEALLOCATED_NORMAL 18
CM_PARAMETER_ERROR 19
CM_PRODUCT_SPECIFIC_ERROR 20
CM_PROGRAM_ERROR_NO_TRUNC 21
CM_PROGRAM_ERROR_PURGING 22
CM_PROGRAM_ERROR_TRUNC 23
CM_PROGRAM_PARAMETER_CHECK 24
CM_PROGRAM_STATE_CHECK 25
CM_RESOURCE_FAILURE_NO_RETRY 26
CM_RESOURCE_FAILURE_RETRY 27
CM_UNSUCCESSFUL 28
CM_OPERATION_INCOMPLETE 35
CM_SYSTEM_EVENT 36

 

Gateway error codes

CPIC_ERROR 221 Error in the CPIC interface
CANT_GET_MEMORY 222 Memory bottleneck
NI_READ_FAILED 223 Network read error
NI_WRITE_FAILED 224 Network write error
INVALID_REQUEST 225 Invalid request
NOT_YET_CONNECTED 226 Not yet connected
GW_WP_DIED 227 Gateway process died
SHM_READ_FAILED 228 Shared memory problem (read)
SHM_WRITE_FAILED 229 Shared memory problem (write)
NO_MORE_LU 230 No available LU
NO_MORE_WP 231 No available gateway process
CANT_START_WORKPROCESS 232 Error when starting the gateway process
WRONG_COMM_TYPE 233 Wrong communication type
CONNECT_FAILED 234 Connection setup failed
COMM_TABLE_ERROR 235 Error in comm. Table
GW_CONNECT_FAILED 236 No connection to the gateway
GW_DISCONNECTED 237 Connection to the gateway disconnected
WRITE_TO_GW_FAILED 238 Error with GW comm. (write)
READ_FROM_GW_FAILED 239 Error with GW comm. (read)
INVALID_LEN 240 Invalid length
INVALID_ENVIRONMENT 241 Invalid environment
GW_TIMEOUT 242 Timeout
GW_CONNECT_TO_R3 243 Error when setting up R/3 connection
SYSTEM_DISCONNECTED 244 Partner disconnected connection
WRONG_APPCHDR_VERSION 246 Incorrect APPC header version
GW_APPC_SERVER_DOWN 247 Loc. gateway not started
TXCOM_TABLE_FAILED 248 Error when accessing TXCOM
COMM_TABLE_OVERFLOW 249 Comm. table full
C_NO_MEM 450 No memory
C_NO_SIDE_INFO 451 No SIDE INFO entry
C_TP_START 452 TP-START failed
C_NO_INIT 453 No initialization
C_GETLU 454 “getlu” failed
C_SIGNAL 455 “signal” failed
C_TIMEOUT 456 Timeout when establishing connection
C_ALLC 457 CMALLC failed
C_SEND 458 CMSEND failed
C_PREPARE 459 Prepare-To-Receive failed
C_FLUSH 460 CMFLUS failed
C_RECEIVE 461 CMRCV failed
C_NO_ARGUMENT 462 Missing argument
C_GET_ALLOCATE 463 “get_allocate” failed
C_DEAL 464 CMDEAL failed
C_TP_END 465 TP-END failed
C_MAX_CONV 466 Max. number conv. Reached
C_SNAOPEN 467 “snaopen” failed
C_SNACTL 468 “snactl” failed
C_NO_FLUSH 469 No flush in IBM environment
C_SNACLSE 470 “snaclse” failed
C_STATE_CHECK 471 Status error
C_NO_SIDE_INFO_ENTRY 472 No side info entry
C_NO_CONV 473 No conversation
C_MANUAL_CANCELD 474 Connection manually cancelled
C_AUTO_CANCELD 475 Connection automatically cancelled
C_NO_PARTNER 476 No partner found
C_CONFIRM 477 Confirm failed
C_CONFIRMED 478 Confirmed failed
C_NO_HOST_IN_SIDE_INFO 479 GWHOST not in side info entry
C_NO_SERV_IN_SIDE_INFO 480 GWSERV not in side info entry
C_NO_PROT_IN_SIDE_INFO 481 PROTOCOL not in side info entry
C_NO_LU_IN_SIDE_INFO 482 LU not in side info entry
C_NO_TP_IN_SIDE_INFO 483 TP not in side info entry
C_NO_GATEWAY_CONNECTION 484 No connection to the gateway
C_GETHOSTNAME 485 gethostname failed
C_NO_SAP_CMACCP 486 SAP_CMACCP not executed
C_NO_PROGRAM_NAME_ARG 487 Program not in arg. List
C_NO_HOST_ARG 488 Host not in arg. List
C_NO_SERV_ARG 489 Service not in arg. List
C_NO_CONVID_ARG 490 Conv. ID not in arg. List
C_ILLEGAL_PARAMETER 491 Illegal parameter
C_LU62CVCT 492 LU62CVCT failed
C_LU62ATTACH 493 LU62ATTCH failed
C_NO_CONV_TABLE 494 No conv. Table
C_ILL_CONV_TABLE 495 Incorrect conv. Table
C_ILL_MOD_VALUES 496 Invalid conv. Modification
C_NIHOSTTOADDR 497 NiHostToAddr failed
C_NIADDRTOHOST 498 NiAddrToHost failed
C_THOST_FAILED 499 Reading table THOST failed
INVALID_MODE 630 Invalid mode number received
MAX_NO_OF_GATEWAYS 631 Max. no. of gateways reached
MISSING_LU_SPEC 632 No LU specified
MAX_CPIC_CLIENTS 633 Max. no. of clients reached
BAD_TPNAME 634 Invalid TP name
FORK_FAILED 635 Fork failed
BAD_NI_HANDLE 636 Invalid NI handle
REXEC_FAILED 637 rexec failed
TP_START_FAILED 638 Starting the TPs failed
NI_DG_SEND_FAILED 639 NiDgSend failed
INTERNAL_ERROR 640 Internal error
GW_HOST_UNKNOWN 664 Gateway host unknown
GW_SERVICE_UNKNOWN 665 Gateway service unknown
GW_NI_ERROR 666 NI error
GW_EXEC_FAILED 667 exec failed
R2_RESTARTED 668 R/2 restarted
SYM_DEST_TOO_LONG 669 Symb. destination too long
NO_MORE_SIDE_INFO_ENTRY 670 No more side info entries
R3_LOGIN_FAILED 672 R/3 Login failed
IMS_ERROR_PURGING 673 IMS error purging
PENDING_TERM_OUTPUT 674 Timeout of reg. Programs
GW_SECURITY_ERROR 676 TP not registered
GW_TIMEOUT_REG_PRGM 677 Timeout of registered program
TP_REGISTERED 678 TP is registered
TP_NOTREGISTERED 679 TP not registered
TP_REG_SECU_ERROR 720 Security violation for reg. Prgrms
GW_SNC_DISABLED 721 SNC deactivated
GW_SNC_REQUIRED 722 SNC required
GW_SNC_NAME_NOT_SET 723 SNC name not defined
GW_SNC_NAME_NO_DEFAULT 724 Default SNC name not permitted
GW_SNC_PROT_NOT_SUPP 725 Log does not support SNC
GW_R3_NOT_CONNECTED 726 No local R/3 system
GW_SNC_REQUIRED_FOR_LU_TP 727 SNC required
CONV_ID_NOT_FOUND 728 Conversation ID not found
GW_SNC_SECURE_PORT 729 Comm. must make SNC
GW_SNC_START_EXT_DIS 730 Start of ext. Program deactivated
GW_SHUTDOWN 731 Gateway was shut down
GW_REM_PRGM_DISABLED 732 No external programs
GW_STOLEN_CONVID 733 Conversation ID does not fit
GW_NET_CONV_ERROR 734 Net Conv Error
GW_MONITOR_DISABLED 735 Monitor not active
GW_DUPLICATE_CVID 736 Conv. ID not unique
GW_CONNECT_TIMEOUT 737 Timeout of connection setup to remote system
GW_REQ_TO_DP_FAILED 738 Request could not be transferred to the dispatcher
GW_CLIENT_ALREADY_DISC 739 Connection partner has already disconnected the connection
GW_NO_HOST_IN_ROUTE 740 No hosts contained in route
GW_ROUTE_CONNECT_DIS 741 Route already disconnected (no longer used)
GW_CONN_IS_FREE 742 Connection already released
GW_CONN_IS_DISC 743 Connection disconnected
GW_REQBLK_ADM_ERROR 744 Error in request processing
GW_BUFINFO_ERROR 745 Error in buffer handling
GW_HDLINFO_ERROR 746 Error in network handling
TP_REG_NOREG_ERROR 747 Number of registrations exceeded for this program
TP_REG_ACCESS_DENIED 748 Access to registered server denied
GW_PARAM_NOT_FOUND 749 Parameter could not be found
GW_PRXY_ACCESS_DENIED 750 Gateway must not be used as a Proxy
GW_ACCEPT_TIMEOUT 751 Timeout when logging on (gw/accept_timeout)
GW_WRONG_SERVER 752 not connected to the gateway
C_NO_SIDE_INFO_GW 760 No side info file
C_RECEIVE_WITH_PAR 761 CMRCV failed
C_NO_SNC_LIB_ARG 762 SNC library not in arg. List
C_NO_SNC_NAME_ARG 763 SNC name not in argument list
C_SNC_INV_HANDLE 764 SNC invalid handle
C_SNC_DISABLED 765 SNC deactivated
C_SNC_ERROR 766 General SNC error
C_SNC_MODE_ON 767 SNC required
C_SNC_NOT_AVAILABLE 768 SNC not available
C_ILLEGAL_PARAMETER2 769 Invalid parameter
C_AREA_TOO_SMALL 770 Memory area too small
C_SNC_INV_STATE 771 Invalid SNC status
C_RETURN_CODES 772 Error numbers
C_REG_STATE_CHECK 773 Status violation during registration
C_CPICTERR 774 Error text for error number
C_NO_SYMDEST 775 No symbolic destination
C_FUNCTION_NOT_SUPPORTED 776 Function not supported
C_NET_CONV_ERROR 777 Conversion error when reading or writing data
C_SIDEINFO_DISABLED 778 Access to side info file deactivated
C_TIMEOUT_BLOCK 779 Timeout for blocking network call
C_FAILOVER_ERROR 780 Error when communicating with failover software
C_PROXY_ERROR 781 Error when communicating with the proxy server
C_MPI_ERROR 782 Error when communicating with memory pipes (Mpi)
C_MTX_ERROR 783 Error with lock management (mutex)
C_CS_ERROR 784 Error with lock management (critical section)

 

 

 

Check Also

Determining the Number of Work Processes

Procedure The context change for processes on Windows is more time-consuming compared to UNIX. Therefore, …